Online Power Profiler for Bluetooth LE

BLE Settings

PHY

Role

Interval(ms)

TX payload(Bytes):

RX payload(Bytes):

Conn slave latency:

Master sleep clock accuracy:

Slave sleep clock accuracy:

Test setup

Chip

Voltage

Clock source

BLE details

PHY

Interval

Active length

Number of packets

Master sleep clock accuracy

Slave sleep clock accuracy

LL PDU size

RX payload length

TX payload length

Current consumption

Idle current

Clock calibration current

Average current per cycle

formula: battery life(hrs) = capacity(mAh) / consumption(mA)

Battery Run Time

The tool is based on a model of measured values, and is not showing the actual measurement. The results are therefore estimates of the expected value. It is meant for evaluation purposes only, and will not give the exact numbers in every use case. Testing shows that the estimated average current is typically within 5% of the actual value. The device to device variations will also add to this inaccuracy.

Please refer to the ING918XX data sheet for expected min/max values for the different components.